ClearCut

D/A

1. Prime a clean dry pad with a very thin worked-in layer of compound and add an additional 3-4 pea sized drops of ClearCut.
2. Spread product across a section.
3. Raise speed to MED/HIGH.
4. Use MIN pressure for first 2-3 passes and increase with each pass.
5. When scratches disappear or the polish becomes clear, wipe clean with a MF towel.
6. Clean pad.
7. Move to next section, apply 2-4 pea-sized drops to the pad and repeat steps 2-7.

ROTARY

1. Prime a clean dry pad with a very thin worked-in layer of compound and add an additional 3-4 pea sized drops of ClearCut.
2. Spread product across a section.
3. Keep polisher on LOW speed with LOW pressure.
4. Use MIN pressure for first 1-2 passes increasing pressure ever so slightly. Work with max 1000-1200 RPM.
5. When scratches disappear or the polish becomes clear, wipe clean with a MF towel.
6. Clean pad.
7. Move to next section, apply 2-4 pea-sized drops to the pad and repeat steps 2-7.