Velocity Cut Plus

Description

DIRECTIONS

Suitable for DA & Rotary Machines.

1. Prime clean, dry pad with a thin layer of Axial Velocity Cut Plus Compound. Add 3-4 pea-sized drops.
2. Spread evenly over the work area before turning on the machine.
3. Rotary – 1000-1200 RPM. DA -speed 3-4.
4. Light pressure 2-3 passes to activate abrasives.
5. Increase pressure and keep steady movement untul defects fade.
6. Light pressure for final passes for a high-gloss finish.
7. Wipe with microfiber towel.
8. Clean pad to remove residue and maintain performance.
9. Add 2-4 pea-sized drops and continue section by section.

PRECAUTIONS

Do not ingest. Test on an inconspicuous area before use. Work in a ventilated area. Keep out of reach of children.